How To Configure The 80mm Cloud Printer
Obtain the IP address of the cloud printer.
Double press the pairing button at the bottom of the printer, and the printer will broadcast: network self-checking, please wait.
After the self-check is completed, a self-check receipt will be printed, and then you can obtain the IP address corresponding to each type of network.
Log into the setup webpage
Open the browser and enter your LAN-Fixed IP address (as noted above: http://192.168.3.1), then the login interface (below) will be displayed. By default the factory password is blank. Click Log in.
Change your password
After login, click Change Password in the upper right corner
Enter:
Old Password – Leave blank if configuring the password for the first time
New Password – Recommend 8 character minimum
Confirm Password - Confirmation password must be an exact copy of the New Password
Click OK to save the new password.
Parameter Settings
Device Information
The Device Information page displays the device model, serial number (SN), version, and other information.
Ethernet
The Ethernet page displays the dynamic IP address and netmask information. If you want to set up a static IP address, you can enter the IP address respectively in IP Address (Static), Netmask (Static), and Gateway (Static).
This printer supports multi-IP mode, and the "dynamically assigned IP address" and "statically assigned IP address" can coexist and be used at the same time.
Wi-Fi
The Wi-Fi page displays the IP address (DHCP) and Netmask (DHCP) information. If you want to set up a static IP address, you can enter the IP address respectively in IP Address (Static), Netmask (Static), and Gateway (Static).
This printer supports multi-IP mode, and the "dynamically assigned IP address" and "statically assigned IP address" can coexist and be used at the same time.
To configure the wireless network click Configure SSID… and enter the SSID (Wi-Fi network name) and Password. Click OK to commit the changes, then click Save.
Print Settings
On the Print Settings page, you can set up some common function items of the printer.
Image Settings
On the Image Settings page, you can set NV images and grayscale images.
Cutter Settings
On the Cutter Settings page, you can set the cutter action to automatically cut when an image or document prints.
Results: Completing these steps will connect the 80mm Cloud Printer to your network and prepare it for printing with your intended device.