Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

Note- this is for internal use only. This will cover how to change the DPI settings for Jane Technology

  1. Log in to MGT https://mgt.sunmi.com/

  2. Go to Operation Management- System Status Management- Device Configuration

    Dingtalk_20240129134624.jpg

  3. Once there select Add new device configuration

    Dingtalk_20240129134957.jpg

  4. Select Parameter Modification

    image-20240129-215421.png

  5. Enter SN, Parameter and value

The parameter will be display_density/display_density

The value is 160

  1. Once entered, select Save and push

image-20240129-215702.png

  • No labels